LTC6910-2CTS8#TR Overview
There is a SOT-23-8 case package that contains the instrumentation amplifiers. 8 pins are located on the operational amplifiers. The input offset voltage is 3mV. The buffer amplifier is capable of operating from a supply current of 3.5mA . There should be no change in the voltage gain at 36dB. This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below 0°C. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 70°C. The op amp is rated for an operating supply voltage of 1. Under 11V is the minimum supply voltage for this electric component. Over 2.7V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 5.25V. In order for the buffer amplifier resistance to remain within the 100MOhm range, the device should be tested.
LTC6910-2CTS8#TR Features
36dB voltage gain
Resistance of 100MOhm
LTC6910-2CTS8#TR Applications
There are a lot of Analog Devices, Inc.
LTC6910-2CTS8#TR Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
