ATF1502ASV-20JC44 Overview

A mobile phone network consists of 32macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The product is contained in a J package.The device has 32inputs and outputs.Devices are programmed with terminations of [0].This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.It is programmed with 44 pins.If you use this device, you will also find [0].As a building block for digital circuits, there are 750gates.High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].Surface Mountis used to mount this electronic component.A total of 44pins are provided on this board.A voltage of 3.6V is the maximum supply voltage for this device.Normally, it operates with a voltage of 3VV as its minimum supply voltage.This device runs on 3Vvolts of electricity.There should be a temperature above 0°Cat the time of operation.Ideally, the operating temperature should be below 70°C.It is recommended that the maximum frequency be less than 83.3MHz.A programmable logic type is categorized as EE PLD.

ATF1502ASV-20JC44 Features

J package
32 I/Os
44 pin count
44 pins
3V power supplies

ATF1502ASV-20JC44 Applications

There are a lot of Atmel (Microchip Technology) ATF1502ASV-20JC44 CPLDs applications.

• State machine design
• PLC analog input modules
• Complex programmable logic devices
• INTERRUPT SYSTEM
• Dedicated input registers
• TIMERS/COUNTERS
• ToR/Aggregation/Core Switch and Router
• DMA control
• Software Configuration of Add-In Boards
• POWER-SAVING MODES