MOR2 Description

The MOR2 is a Panel Meters - Accessory. Smart power analyzer for three phases with an integrated advanced configuration system and LCD data display. recommended in particular for the measurement of the primary electrical variables. The WM30 is built on a modular panel mounting housing with an IP65 (front) protection level. Additionally, the analyzer can be equipped with digital outputs, which can either be alarm outputs or pulse outputs proportionate to the active and reactive energy being measured.

The following modules can be added to the instrument: Ethernet, BACnet-IP, BACnet MS/TP, Profibus DP V0 communication ports, pulse and alarm outputs, and RS485/RS232. Using WM3040Soft, parameter programming and data reading are simple tasks.

MOR2 Features

• Both system and single phase variables with average and max calculation

• Harmonic analysis (FFT) up to the 32nd harmonic (current and voltage)

• Energy measurements (imported/exported): total and partial kWh and kvarh

• Energy measurements according to ANSI C12.20 CA 0.5, ANSI C12.1 (revenue grade)

• Run hours counter (8+2 DGT)

• Real time clock function

• Application adaptable display and programming procedure (Easyprog function)

• Universal power supply: 24-48 VDC/AC, 100-240 VDC/AC

• Front dimensions: 96x96 mm

• Front protection degree: IP65, NEMA4X, NEMA12

• Class 0.5S (kWh) according to EN62053-22

• Class C (kWh) according to EN50470-3

• Class 2 (kvarh) according to EN62053-23

• Accuracy ±0.2% RDG (current/voltage)

• Instantaneous variables readout: 4x4 DGT

• Energies readout: 9+1 DGT

• System variables: VLL, VLN, A, VA, W, var, PF, Hz, Phase-sequence-asymmetry-loss.

• Single phase variables: VLL, VLN, AL, An (calculated), VA, W, var, PF

• One RS232 and RS485 port (on request)

• Communication protocol: MODBUS-RTU

• MODBUS TCP/IP Ethernet port (on request)

• BACnet-IP over Ethernet port (on request)

• BACnet MS/TP over RS485, BTL approved (on request)

• Ethernet/IP port, ODVA approved (on request)

• Profibus DP V0 port (on request)

• Up to 2 digital outputs (pulse, alarm, remote control) (on request)

• Up to 4 freely configurable virtual alarms

• Up to 2 analogue outputs (+20mA, +10VDC) (on request)

MOR2 Applications

• Wireless Data Access Cards

• USB Type-C

• Consumer Battery Chargers

• Mobile Wall Chargers