AS1108PL Overview

The package follows the same design pattern as Tube.There is a version 20-DIP (0.300, 7.62mm) of the package that includes it as part of it.The type of display used in this electrical device is LED.This electronic component is mounted on the board using the Through Hole axis.Display drivers is recommended that this electrical part be operated at a temperature of 0°C~70°C.As long as you use a 2.7V~5.5VV power source, it should work.Transmission lines are terminated with 20 terminations using devices whose characteristic impedance matches that of the transmission line.There are a total of 21 20 pins on the device.As a matter of fact, it has 20 pins installed.As this electronic component is mounted on the board using the Through Hole axis, we can adjust the position of the component.There is a voltage of 5V applied to the supply voltage of this device.To ensure that 330mA plays its full role, the supply current must be provided so that the function of 330mA can be accomplished.8 segments refer to the segment of any of the Seller Group's equipment solutions business known as "Electronics".To ensure high efficiency, the supply voltage should be maintained at 5.5V.A voltage is output from it that represents the output voltage of 3.5V.I have set it up so that it outputs 12.

AS1108PL Features

20-DIP (0.300, 7.62mm) package
20 pin count
20 pins
12 output

AS1108PL Applications

There are a lot of ams
AS1108PL display drivers applications.

• Relay Driver
• Digital Clock, Thermometer, Counter, Voltmeter
• Instrumentation Readouts
• Instrumentation
• Test Equipment
• Hand Held Instruments
• Bargraph Dlsplays
• Numerlc and Non-Numerlc Panel Dlsplays
• High and Low Temperature Envlronment s where LCD
• Dlsplay Integrtty ls Compromissd