AS1917V-T Overview
This power management consists of 5 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In a 1 supply voltage, the PMIC chip conducts. The total number of pins on this power management is 5. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. This IC power should be powered by no more than 3.6V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few.
AS1917V-T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
AS1917V-T Applications
There are a lot of ams AS1917V-T Voltage Supervisors applications.
- Consumer electronics
- Power distribution systems of operating room
- Radio
- Military communications
- Precision measurement
- Power communication system
- Automotive power systems
- Functional modules
- Personal computers
- Dash board
