EPM3032ALI44-10N Overview

In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.In the 44-LCC (J-Lead)package, you will find it.This device has 34 I/O ports programmed into it.44terminations have been programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.As a result, it is packaged as Tray.Ensure its reliability by operating at [0].There should be a Surface Mounton the chip.The FPGA belongs to the MAX? 3000A series.When using this device, YEScan also be found.In accordance with the [0], its related parts are listed.There are 600 gates, which are devices that acts as a building block for digital circuits. In total, there are 2 logic elements/blocks.3.6Vrepresents the maximal supply voltage (Vsup).If the supply voltage (Vsup) is greater than 3V, then the device will work properly.Ideally, its clock frequency should not exceed 103.1MHz.

EPM3032ALI44-10N Features

44-LCC (J-Lead) package
34 I/Os
The operating temperature of -40°C~85°C TA

EPM3032ALI44-10N Applications

There are a lot of Intel EPM3032ALI44-10N CPLDs applications.

• Software-driven hardware configuration
• STANDARD SERIAL INTERFACE UART
• ON-CHIP OSCILLATOR CIRCUIT
• Multiple DIP Switch Replacement
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Storage Cards and Storage Racks
• Synchronous or asynchronous mode
• Power automation
• TIMERS/COUNTERS
• INTERRUPT SYSTEM