NG80960KB25 Overview

The microprocessor is convenient for international shipping since it is packaged in PQFP. The packaging method Bulk provides high reliability. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. To date, there have been 132 terminations. You should be able to turn on and run the embedded microprocessor with a voltage supply of 5V. An architecture based on 32 bits is used. 25MHz is the CPU's frequency. Datasheets for 132 pin functions can be found here. The embedded microprocessor is a typical Microprocessors. With a width of 32, this CPU has a wide external data bus. If the temperature is higher than 100°C, the microprocessor should not operate. A total of 132 pins are injected into the CPU microprocessor's body. This CPU is widely used in a variety of applications with its Surface Mount mounting. It is possible to use the micro processor from 5V. According to the datasheet, the embedded microprocessor requires 5V power supply. CPU voltages cannot exceed 420mA. A voltage greater than 5.25V should not normally be applied to the embedded microprocessor. It is recommended to feed the CPU microprocessor with a voltage of 4.75V. The embedded microprocessor also includes the following features: REGISTER SCOREBOARDING; 25 MIPS MAX; 9.4 MIPS SUSTAINED; BURST BUS. Hardware interrupts can be dealt with by terminating 4 external interrupts.

NG80960KB25 Features

32-Bit Structure

NG80960KB25 Applications

There are a lot of Intel
NG80960KB25 Microprocessor applications.

• Equipment control
• Instrument control
• Consumer electronics products
• Toys
• Robots
• Radio
• Television
• Heater/Fan
• Calculator
• Kindle