TM266DVA1 Overview

This LED driver IC features an enhanced 28-SMD Module package for driving common LEDs.As a Transceiver can transceiver, this part has enabled many applications to be served.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.It takes 5V from the power supply to run this differential driver.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C TA.An enhanced power dissipation driver IC with 28 pins.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.During operation, the transceiver module's temperature must be below 85°C.There must not be a minimum operating temperature of -40°C for this optical transceiver.As far as the transceiver's maximum supply voltage of this IC is concerned, it is rated at 5.25V.In total, 1 transmitters have been installed, which produce radio waves and transmit data by using antennas to send data.It is possible for this can transceiver to have mal-functions when its input current reaches or exceeds 95mA.For this line driver ic, a minimum supply voltage of 3.14V is required.In order to achieve this, we have opted to use the 28-DIP-GW supplier package for wide receiver.This line driver integrating circuit represents a power-saving technique that is part of the Copperhead? series.

TM266DVA1 Features

28 pins
Copperhead? series

TM266DVA1 Applications

There are a lot of PulseR TM266DVA1 Drivers/Receivers/Transceivers applications.

• Indoor ad hoc meeting
• Cable network front end
• Precision geodetic measurement
• IP cameras
• VoIP phones
• Satellite ground stations
• Wireless HD Photography
• Sensor reporting
• Carrier phase observations
• Switches