TM266DVB1 Overview

With the enhanced 28-SMD Module package, this driver IC is excellent for driving common LEDs.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.It takes 3.3V from the power supply to run this differential driver.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at -55°C~125°C TA.28-pin driver IC with improved power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.Under 85°C, the operating transceiver module's temperature must be kept below.A minimum operating temperature of -40°C should not be reached by this optical transceiver.The transceiver's maximum supply voltage of this IC is rated at 5.25V.In total, 1 transmitters have been installed, which produce radio waves and transmit data by using antennas to send data.A can transceiver that has a current input of 95mA or greater may be affected by malfunctions.There is a minimum required supply voltage of 3.14V for this line driver ic.As a result of this wide receiver utilizing the 28-DIP-GW supplier package, it is power efficient.One of the integrating circuits in the Copperhead? series represents a technique for enhancing power effintegrating circuitiency.

TM266DVB1 Features

28 pins
Copperhead? series

TM266DVB1 Applications

There are a lot of PulseR TM266DVB1 Drivers/Receivers/Transceivers applications.

• Metro access rings
• Cell phones
• Copper connection network
• Car alarm systems
• Optical sub-assembly (OSA)
• Data center
• Thermal management
• AV receiver
• interconnection between switches
• Fiber optic cable connection network