Z84C1008PEC Overview

The DIPpackage is a good fit for it.Access Control Systemsis appropriate for this component.It is possible to find related parts based on the Z84C10.The terminations on it are [0].It is important to remember that this device should be set to 5V.It has a total of 40pins.In order for the operation to be performed, the 40pins must be connected.Currently, Through Holeis mounting it.The device operates at a minimum working temperature of -40°C in order to ensure its reliability.This value enables the part to run consistently with a maximum value of [0].Electronic components are of the DMA Controllersfamily.These devices are incorporated with uPs/uCs/Peripheral ICs of type DMA CONTROLLER.It belongs to the Z80series.The device can deliver voltage at 5V volts.When operating at a frequency of [0], it is capable of achieving good performance.The device has 16I/Os programmed.Components can supply voltages as low as [0].

Z84C1008PEC Features

It is based on Z84C10.
Set the part at 5V volts
DMA CONTROLLER of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz

Z84C1008PEC Applications

There are a lot of Zilog Z84C1008PEC Specialized Interface ICs applications.

• Existing multiplexer applications (both fault-protected and
• Battery-powered systems
• Audio signal routing
• Cross Connects
• Signal routing between systems
• Compatible with 65 V DACs and ADCs such as
• HDTV
• Ultrasound
• Optical Applications
• Low-Voltage