Surface Mount 165 Pin Memory IC 18 Mb kb 15mm mm 175mA mA 36b b
SOT-23
CY7C1381D-100BZI Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Package / Case
FBGA
Number of Pins
165
Published
2004
JESD-609 Code
e0
Pbfree Code
no
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
165
ECCN Code
3A991.B.2.A
Terminal Finish
Tin/Lead (Sn/Pb)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Additional Feature
FLOW-THROUGH ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
BOTTOM
Terminal Form
BALL
Peak Reflow Temperature (Cel)
220
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
1mm
Frequency
100MHz
Pin Count
165
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3.135V
Memory Size
2.3MB
Number of Ports
4
Nominal Supply Current
175mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
100MHz
Access Time
8.5 ns
Organization
512KX36
Output Characteristics
3-STATE
Memory Width
36
Address Bus Width
19b
Density
18 Mb
Standby Current-Max
0.07A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
36b
Length
15mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
CY7C1381D-100BZI Product Details
CY7C1381D-100BZI Overview
There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a FBGA case. This chip has an 2.3MB size of memory on it, so a lot of data can be stored on it. The chip contains 165 terminations. As many as 1 functions are supported for comprehensive working. An 3.3V supply is required for this ic memory chip to operate properly. A package of 165 pins is used to protect this memory device. The memory device has 165 pins, which means that it has 165 memory locations, which indicates it is an 165-bit device. This memory runs on an 3.3V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 175mA. Although it has all the merits this chip has, it is also equipped with FLOW-THROUGH ARCHITECTURE to give a performance boost to the system. Each memory address is accessed by one of 4 ports on this chip. An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an -40°C operating temperature for this device. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 3.135V. A maximum voltage of 3.6V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 100MHz. This Memory chip operates at a maximum frequency of 100MHz.
CY7C1381D-100BZI Features
Package / Case: FBGA 165 Pins Operating Supply Voltage:3.3V Additional Feature:FLOW-THROUGH ARCHITECTURE I/O Type: COMMON Freguency at 100MHz 100MHz terminals
CY7C1381D-100BZI Applications
There are a lot of Cypress Semiconductor CY7C1381D-100BZI Memory applications.