In order to package it as a clock IC, the Tube package is used. Embedded in the 8-SOIC (0.154, 3.90mm Width) package is this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result of this, we can find 8 terminations. The clock generator ic should be grounded with a voltage of 3.3V. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 166.67MHz. The Surface Mount allows this electrical component to be easily installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageFor safety reasons, this frequency generator's supply voltage should remain above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. This electronic component can be classified as a Clock Multiplier, Fanout Distribution. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electronic parts of part number CY2300 are listed below. It is possible to connect to the PLL via 8 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. In general, this clock PLL is considered a Clock Drivers device. The frequency synthesizer features 4 signal outputs to ensure as high a frequency as possible. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns.
CY2300SXC Features
Available in the 8-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2300SXC Applications
There are a lot of Cypress Semiconductor Corp CY2300SXC Clock Generators applications.