As a clock IC, it is packaged by the Tape & Reel (TR) method. The 8-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 8 terminations. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 166.67MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. A maximum voltage of 3V should be used for this frequency generator for safety reasons. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS logic levels. As far as this electronic part is concerned, it can be classified as a Clock Multiplier, Fanout Distribution component. Microprocessor-specific clock PLL with 8 bits. The related electronic parts of part number CY2303 are listed below. There are 8 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 3.3V as the supply voltage. The clock PLL is generally classified as a Clock Drivers device. The output frequency can be magnified as high as possible with the assistance of 3 signal outputs. At maximum 0.2 ns, this analog clock generator has low timing skew.
CY2303SXCT Features
Available in the 8-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2303SXCT Applications
There are a lot of Cypress Semiconductor Corp CY2303SXCT Clock Generators applications.