A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. There is a clock generator embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. There are 8 terminations found in the file. The clock generator ic should be grounded with a voltage of 3.3V. This clock generator receives its inputs from Clock, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. It is safe to use this frequency synthesizer with a supply voltage above 3V. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. These related electrical parts are available for the base part number CY2304. PLL is designed with 8 pins. The supply voltage should be maintained at 3.3V for high efficiency. The output frequency can be amplified as high as possible with its 4 signal outputs. The maximal same edge skew (tskwd) can not be exceeded.
CY2304SXI-2T Features
Available in the 8-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2304SXI-2T Applications
There are a lot of Cypress Semiconductor Corp CY2304SXI-2T Clock Generators applications.