CY2308SXC-4T Overview

Tape & Reel (TR)-method packaging is used for clock ICs. The 16-SOIC (0.154, 3.90mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 16 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be LVCMOS, LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 133.3MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. The clock-generating IC is a 16-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CY2308. It is possible to connect to the PLL via 16 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. This clock generator can be classified as a kind of Clock Drivers in general. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.2 ns Max, this clock generator offers low timing skew.

CY2308SXC-4T Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY2308SXC-4T Applications

There are a lot of Cypress Semiconductor Corp
CY2308SXC-4T Clock Generators applications.

• Automatic test equipment
• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange