As a clock IC, PLLs is packaged using the Tube method. The 16-SOIC (0.154, 3.90mm Width) package includes this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 16 terminations found in this file. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. Providing a maximum frequency of 133.3MHz, this clock-based RF synthesizer is suitable for a variety of applications. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. A maximum voltage of 3V should be used for this frequency generator for safety reasons. Clock generators should operate with the voltage supply of 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. LVCMOS is designed for clock generator's output. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. Microprocessor-specific clock PLL with 16 bits. This part number CY2308 is related to the following electrical components. Clock generator is designed with 16 pins. There is a maximum supply voltage of 3.3V that frequency generators can handle. Clock generator can also be included into Clock Drivers. Clock PLL is facilitated with 8 signal outputs to magnify output frequency as high as possible. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns.
CY2308SXI-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2308SXI-1 Applications
There are a lot of Cypress Semiconductor Corp CY2308SXI-1 Clock Generators applications.