This clock IC is packaged using the Tube method. The 16-SOIC (0.154, 3.90mm Width) package includes this clock generator. The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible. There are 16 terminations found in this file. For this clock generator ic, a voltage of 3.3V is required. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. A clock-based RF synthesizer that provides a max frequency of 133.33MHz is available. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage (Vsup) reaches 3.6V. This frequency synthesizer requires a supply voltage above 3V to be safe. This clock PLL works with a supply voltage of 3V~3.6V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. As far as this electronic part is concerned, it can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Clock PLL is equipped with 16 pin count. It is possible to find its related electronic parts by searching for the base part number CY2309. There are 16 pins that are available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. The clock PLL is generally classified as a Clock Drivers device. Clock PLL has 9 signal outputs to maximi9e output frequency. The timing skew of this frequency synthesizer is low at 0.25 nsmax. At a frequency of 133MHz, the system can achieve high efficiency.
CY2309SI-1H Features
Available in the 16-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2309SI-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309SI-1H Clock Generators applications.