The Tube method is used for packaging clock ICs. 16-SOIC (0.154, 3.90mm Width) contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains a total of 16 terminations within RF synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. LVCMOS, LVTTL is designed for clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. PLL clock is mounted in the way of Surface Mount. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock generator ic works with 3V~3.6V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. This is a clock generator compatible with LVCMOS logic levels. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. You can find related electrical components to the base part number CY2309. There is a 16 pin that is available on the frequency synthesizers. Supply voltage 3.3V is what clock generator can handle. Clock Drivers-type frequency generators are usually classified as this type. The frequency synthesizer features 9 signal outputs to ensure as high a frequency as possible. There is a low timing skew at 0.25 nsmax with this RF synthesizer. High efficiency is achieved when operating at a frequency of 133.33MHz. The maximal current supplied for phase locked loop's operation reaches 32mA.
CY2309SXC-1H Features
Available in the 16-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2309SXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309SXC-1H Clock Generators applications.