In order to package it as a clock IC, the Tube package is used. The 16-SOIC (0.154, 3.90mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 16 terminations. The clock generator ic should be grounded with a voltage of 3.3V. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. A clock-based RF synthesizer that provides a max frequency of 140MHz is available. This component can be conveniently installed on the panel thanks to the Surface Mount. It would take a maximum supply voltage of 3.6V to operate this time clock generator. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. The temperature should be set at 0°C~70°C to ensure reliable performance. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. Clock PLL is equipped with 16 pin count. The related electrical components for the base part number CY23S08 can be found below. Clock generator is designed with 16 pins. Clock PLL is capable of handling a voltage of 3.3V. The device is usually classified as a type of Clock Drivers device. Low timing skew is provided by this analog clock generator at maximum 0.3 ns. You can find similar clock generators by searching for the 23S family.
CY23S08SXC-2 Features
Available in the 16-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY23S08SXC-2 Applications
There are a lot of Cypress Semiconductor Corp CY23S08SXC-2 Clock Generators applications.