CY2DP1504ZXI Overview

20-TSSOP (0.173, 4.40mm Width) case is available for the cut smart buffer. There is a case available for the circuit clock in Tube. In normal operation, 1.5GHz is the maximum value. A total of 20 terminations can be found in it. Supply voltages of 2.5V allow for high efficiency. As a result, it will be mounted by Surface Mount in this case. This electronic part is classified as Fanout Buffer (Distribution), Multiplexer. It is recommended to set the temperature to -40°C~85°C so the system can perform reliably. 2.375V~3.465V V power should work with it. There are 20 pins on timeing clock. The 20 pins are utilized for operation. This is a member of the CY2DP1504 family. I have enclosed this circuit clock in Clock Drivers for your convenience. 2DL is a family of electronic gadgets. The maximum supply voltage (Vsup) is set to 2.625V. To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 2.375V. As a default, it outputs 4. A power supply of 2.53.3V volts powers it.

CY2DP1504ZXI Features

20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

CY2DP1504ZXI Applications

There are a lot of Cypress Semiconductor Corp CY2DP1504ZXI Clock Buffers & Drivers applications.

• Clock signal format conversion
• Peak detection
• DDR4 JEDEC standard LRDIMM design
• Base station
• Gigabit Ethernet (GbE)
• Other clock/data distribution
• Automatic test equipment
• Edge computing
• Car
• Host bus adapter card