3.3V Clock Buffer, Fanout Distribution 200MHz CY7B994 Clock Generators RoboClock? Series 100 Pins 100-LQFP 100 Terminals Surface Mount 2.97V~3.63V Tape & Reel (TR)
SOT-23
CY7B994V-5AXIT Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
10 Weeks
Contact Plating
Gold, Tin
Mounting Type
Surface Mount
Package / Case
100-LQFP
Surface Mount
YES
Number of Pins
100
Operating Temperature
-40°C~85°C
Packaging
Tape & Reel (TR)
Published
2003
Series
RoboClock™
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
ECCN Code
EAR99
Type
Clock Buffer, Fanout Distribution
Terminal Finish
Matte Tin (Sn)
Additional Feature
CONFIGURABLE AS SINGLE ENDED TTL ALSO
Subcategory
Clock Drivers
Voltage - Supply
2.97V~3.63V
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
CY7B994
Output
LVTTL
Pin Count
100
Number of Outputs
18
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.63V
Supply Voltage-Min (Vsup)
2.97V
Number of Circuits
1
Nominal Supply Current
250mA
Frequency (Max)
200MHz
Family
7B
Input
LVPECL, LVTTL
Ratio - Input:Output
4:18
Max I(ol)
0.002 A
PLL
Yes
Differential - Input:Output
No/No
Prop. [email protected]
0.5 ns
Propagation Delay (tpd)
0.5 ns
Divider/Multiplier
Yes/Yes
fmax-Min
200 MHz
Same Edge Skew-Max (tskwd)
0.8 ns
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
CY7B994V-5AXIT Product Details
CY7B994V-5AXIT Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. In the 100-LQFP package, there is an embedded clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains 100 terminations that can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. In this clock generator, LVPECL, LVTTL is used as the input to the clock. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. Surface Mount-slots make it easy to mount this electronic component on panels. The maximal supply voltage (Vsup) reaches 3.63V. In order to maintain safety, this frequency generator should be supplied with voltages above 2.97V. There are 2.97V~3.63V available for use with this clock PLL. Based on test statistics, ambient temperature should be set at -40°C~85°C. LVTTL logic levels are supported by this RF synthesizer. Clock Buffer, Fanout Distribution is the type of electrical part that this component is classified as. In this IC, a 100-bit frequency generator is designed specifically for use in microprocessors. According to the base part number CY7B994, its related parts can be found. There are a number of 100 pins that are available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. In general, this clock PLL is considered a Clock Drivers device. The frequency generator has a CONFIGURABLE AS SINGLE ENDED TTL ALSO feature to improve the output of clock signals. This clock generator is a member of RoboClock? series. Clock PLL is facilitated with 18 signal outputs to magnify output frequency as high as possible. The timing skew of this frequency synthesizer is low at 0.8 nsmax. A search for the 7B family will yield similar electronic parts.
CY7B994V-5AXIT Features
Available in the 100-LQFP Supply voltage of 3.3V Operating supply voltage of 3.3V
CY7B994V-5AXIT Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-5AXIT Clock Generators applications.