4.5V~25V 16-Pin DC to DC converter IC1 Outputs 100kHz~780kHz Transistor Driver
SOT-23
MB39A135PFT-G-JN-ERE1 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
17 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Number of Pins
16
Supplier Device Package
16-TSSOP
Operating Temperature
-30°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2014
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Max Operating Temperature
85°C
Min Operating Temperature
-30°C
Function
Step-Down
Number of Outputs
1
Output Voltage
3.36V
Output Type
Transistor Driver
Operating Supply Voltage
25V
Min Supply Voltage
4.5V
Operating Supply Current
2.7mA
Output Configuration
Positive
Output Current
60mA
Voltage - Supply (Vcc/Vdd)
4.5V~25V
Control Features
Current Limit, Power Good, Soft Start
Topology
Buck
Min Input Voltage
4.5V
Frequency - Switching
100kHz~780kHz
Max Input Voltage
25V
Synchronous Rectifier
Yes
Min Output Voltage
700mV
Clock Sync
No
Output Phases
1
Number of Output Phases
1
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
MB39A135PFT-G-JN-ERE1 Product Details
MB39A135PFT-G-JN-ERE1 Overview
In the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 4.5V~25V volts and has 4.5V~25V supply voltage. Suitable for a -30°C~85°C TA dc switcher. This switching controller can switch at 100kHz~780kHz. A generalization of dc dc regulator can be made using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Power Good, Soft Start. 16 pins are on switching converter. A 3.36V voltage of DC regulator was detected in the test statistics. normally, the dc dc regulator's output current is 60mA, which you should keep in mind when starting a project. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. It is suggested that users apply 25V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Ideally, dc regulator should be kept at a temperature of -30°C or higher. A temperature of 85°C degrees Celsius is recommended. The maximum input voltage of the dc switcher is 25V, so users need to limit the voltage accordingly. The supplier dc dc controller package for this part would be 16-TSSOP. A voltage of 4.5V must be present in the supply. With a current supply of 2.7mA, it runs. The voltage controller's lowest voltage output is not less than 700mV. This controller contains 1 phases.
MB39A135PFT-G-JN-ERE1 Features
Transistor Driver Outputs Switching Frequency: 100kHz~780kHz Current Limit, Power Good, Soft Start
MB39A135PFT-G-JN-ERE1 Applications
There are a lot of Cypress Semiconductor Corp MB39A135PFT-G-JN-ERE1 DC to DC converter applications.