MB88152APNF-G-100-JNERE1 Overview

In order to package it as a clock IC, the Tape & Reel (TR) package is used. 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. There are a total of 8 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, CMOS, Crystal is designed to be the input of the clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. This clock-based frequency generator provides a frequency up to 134MHz Max. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL works with 3V~3.6V supply voltage provided. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. CMOS logic levels are supported by this RF synthesizer. Spread Spectrum Clock Generator is the type of electrical part that this component is classified as. This clock generator can be classified as a kind of Clock Generators in general. In the case of excessive supply current (greater than 7mA), an element may be thermally destroyed.

MB88152APNF-G-100-JNERE1 Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V

MB88152APNF-G-100-JNERE1 Applications

There are a lot of Cypress Semiconductor Corp MB88152APNF-G-100-JNERE1 Clock Generators applications.

• Radio receivers
• Smartphones
• FM demodulation networks for FM operations
• Signal modulation and demodulation
• PMR (Professional Mobile Radio)
• Microwave point-to-point systems
• Symbol synchronization
• Walkie-talkies
• Digital logic circuits
• Media broadcast servers