3/3.3V V Surface Mount FL-S Memory IC FL-S Series 128 Mb kb 75mA mA 1b b
SOT-23
S25FL128SAGNFV001 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
13 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-WDFN Exposed Pad
Number of Pins
8
Operating Temperature
-40°C~105°C TA
Packaging
Tube
Published
2013
Series
FL-S
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
8
Additional Feature
IT ALSO CONFIGURED AS 256M X 1
Technology
FLASH - NOR
Voltage - Supply
2.7V~3.6V
Terminal Position
DUAL
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
1.27mm
Qualification Status
Not Qualified
Supply Voltage-Max (Vsup)
3.6V
Power Supplies
3/3.3V
Supply Voltage-Min (Vsup)
2.7V
Interface
SPI, Serial
Memory Size
128Mb 16M x 8
Nominal Supply Current
75mA
Memory Type
Non-Volatile
Clock Frequency
133MHz
Access Time
8 ns
Memory Format
FLASH
Memory Interface
SPI - Quad I/O
Organization
32MX4
Memory Width
4
Address Bus Width
1b
Density
128 Mb
Standby Current-Max
0.0003A
Sync/Async
Synchronous
Word Size
1b
Programming Voltage
3V
Serial Bus Type
SPI
Endurance
100000 Write/Erase Cycles
Write Cycle Time-Max (tWC)
500ms
Data Retention Time-Min
20
Write Protection
HARDWARE/SOFTWARE
Alternate Memory Width
2
Boot Block
BOTTOM
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
164
$2.93780
$481.7992
S25FL128SAGNFV001 Product Details
S25FL128SAGNFV001 Overview
In this case, the memory type of the device can be classified as Non-Volatile. There is a Tube case available. As you can see, it is embedded in 8-WDFN Exposed Pad case. The chip has an 128Mb 16M x 8 memory. FLASH-format memory is used in this device, which is a mainstream design. Featuring an extended operating temperature range of -40°C~105°C TA, this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 2.7V~3.6V volts. The recommended mounting type for memory ics is Surface Mount. On the chip, there are 8 terminations that are planted. The comprehensive working procedure of this part involves 1 functions. The memory device is designed to be supplied with an 3V volt power supply in order to operate properly. It is important to note that the memory has a clock frequency rotation within the range of 133MHz. The memory device has an 8-pin package, which encloses it in a small package. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. It is rated 75mA for its nominal supply current when it comes to the memory component. In spite of all the merits this chip has, it also features IT ALSO CONFIGURED AS 256M X 1 to level up system performance. The power supply needed for this memory chip is only 3/3.3V . As a member of the FL-S series memory devices, this part plays an important role for its target applications. The SPI-type serial bus this memory integrates with is helpful for transferring data to the CPU. There is a need for a programming voltage of 3V in order to modify the state of some nonvolatile memory arrays.
S25FL128SAGNFV001 Features
Package / Case: 8-WDFN Exposed Pad 8 Pins Additional Feature:IT ALSO CONFIGURED AS 256M X 1
S25FL128SAGNFV001 Applications
There are a lot of Cypress Semiconductor Corp S25FL128SAGNFV001 Memory applications.