3/3.3V V Surface Mount PL-J Memory IC PL-J Series 32 Mb kb 8.15mm mm 55mA mA 16b b
SOT-23
S29PL032J70BFI123 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
48-VFBGA
Number of Pins
48
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Series
PL-J
JESD-609 Code
e1
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
48
ECCN Code
3A991.B.1.A
Terminal Finish
Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5)
Additional Feature
TOP AND BOTTOM BOOT BLOCK
HTS Code
8542.32.00.51
Technology
FLASH - NOR
Voltage - Supply
2.7V~3.6V
Terminal Position
BOTTOM
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
0.8mm
[email protected] Reflow Temperature-Max (s)
40
Supply Voltage-Max (Vsup)
3.6V
Power Supplies
3/3.3V
Supply Voltage-Min (Vsup)
2.7V
Memory Size
32Mb 2M x 16
Nominal Supply Current
55mA
Memory Type
Non-Volatile
Memory Format
FLASH
Memory Interface
Parallel
Data Bus Width
16b
Organization
2MX16
Memory Width
16
Write Cycle Time - Word, Page
70ns
Address Bus Width
21b
Density
32 Mb
Standby Current-Max
0.000005A
Access Time (Max)
70 ns
Sync/Async
Asynchronous
Word Size
16b
Programming Voltage
3V
Data Polling
YES
Toggle Bit
YES
Command User Interface
YES
Number of Sectors/Size
1662
Sector Size
4K32K
Page Size
8words
Ready/Busy
YES
Boot Block
BOTTOM/TOP
Common Flash Interface
YES
Height Seated (Max)
1mm
Length
8.15mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
S29PL032J70BFI123 Product Details
S29PL032J70BFI123 Overview
There is a Non-Volatile memory type associated with this device. The case comes in the Tape & Reel (TR) style. As you can see, it is embedded in 48-VFBGA case. The memory size of the chip is 32Mb 2M x 16 Mb. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -40°C~85°C TA. The device is capable of handling a supply voltage of 2.7V~3.6V. There is a recommended mounting type of Surface Mount for it. 48 terminations are planted on the chip. This part supports as many as 1 functions for the comprehensive working procedure. An 3V supply is required for this ic memory chip to operate properly. In this ic memory chip, there is an 48-pin package that encloses the device. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. There is a nominal supply current rating of 55mA for this memory component. This chip features all the merits of a conventional chip, but it also features TOP AND BOTTOM BOOT BLOCK to improve system performance. The power supply needed for this memory chip is only 3/3.3V . This part plays an important role in applications that target the PL-J series of memory devices. The programming voltage required for certain nonvolatile memory arrays is 3V. A total of 1662 specifically sized divisions are contained in this memory.