3/3.3V V Surface Mount PL-J Memory IC PL-J Series 64 Mb kb 8.15mm mm 55mA mA 16b b
SOT-23
S29PL064J60BFW120 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
48-VFBGA
Number of Pins
48
Operating Temperature
-25°C~85°C TA
Packaging
Tray
Series
PL-J
JESD-609 Code
e1
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
48
ECCN Code
3A991.B.1.A
Terminal Finish
Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5)
Additional Feature
TOP AND BOTTOM BOOT BLOCK
HTS Code
8542.32.00.51
Technology
FLASH - NOR
Voltage - Supply
2.7V~3.6V
Terminal Position
BOTTOM
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
0.8mm
[email protected] Reflow Temperature-Max (s)
40
Supply Voltage-Max (Vsup)
3.6V
Power Supplies
3/3.3V
Supply Voltage-Min (Vsup)
2.7V
Memory Size
64Mb 4M x 16
Nominal Supply Current
55mA
Memory Type
Non-Volatile
Memory Format
FLASH
Memory Interface
Parallel
Organization
4MX16
Memory Width
16
Write Cycle Time - Word, Page
60ns
Address Bus Width
22b
Density
64 Mb
Standby Current-Max
0.000005A
Access Time (Max)
60 ns
Sync/Async
Asynchronous
Word Size
16b
Programming Voltage
3V
Data Polling
YES
Toggle Bit
YES
Command User Interface
YES
Number of Sectors/Size
16126
Sector Size
4K32K
Page Size
8words
Ready/Busy
YES
Boot Block
BOTTOM/TOP
Common Flash Interface
YES
Height Seated (Max)
1mm
Length
8.15mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
S29PL064J60BFW120 Product Details
S29PL064J60BFW120 Overview
Its memory type can be classified as Non-Volatile. In addition, memory ics is available in a Tray case as well. As you can see, it is embedded in 48-VFBGA case. Memory size on the chip is 64Mb 4M x 16. There is a mainstream memory format used by this device, which is called FLASH-format memory. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -25°C~85°C TA. The supply voltage can be up to 2.7V~3.6V. There is a recommended mounting type of Surface Mount for it. The chip has 48 terminations. In total, this part supports 1 functions. In order to function properly, this ic memory chip should be powered by a voltage of 3V. It is encased in an 48-pin package that contains this ic memory chip. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. This memory chip is rated 55mA for its nominal supply current. Despite all the merits of this chip, it also has TOP AND BOTTOM BOOT BLOCK to boost system performance. In terms of power requirements, this memory chip uses only 3/3.3V . It is an important component of the PL-J series memory devices used in a variety of applications. The programming voltage required for certain nonvolatile memory arrays is 3V. There are 16126 specific divisions in this ic memory chip, and each division has a specific size.