Surface Mount ML-1 Memory IC ML-1 Series 2 Gb kb 18.4mm mm 30mA mA 8b b
SOT-23
S34ML02G100TFI003 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
48-TFSOP (0.724, 18.40mm Width)
Number of Pins
48
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2014
Series
ML-1
JESD-609 Code
e3
Part Status
Discontinued
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
48
Terminal Finish
Matte Tin (Sn)
HTS Code
8542.32.00.51
Technology
FLASH - NAND
Voltage - Supply
2.7V~3.6V
Terminal Position
DUAL
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
2.7V
Memory Size
2Gb 256M x 8
Nominal Supply Current
30mA
Memory Type
Non-Volatile
Access Time
20 ns
Memory Format
FLASH
Memory Interface
Parallel
Data Bus Width
8b
Organization
256MX8
Memory Width
8
Write Cycle Time - Word, Page
25ns
Address Bus Width
29b
Density
2 Gb
Standby Current-Max
0.00005A
Sync/Async
Asynchronous
Word Size
8b
Programming Voltage
3V
Data Polling
NO
Toggle Bit
NO
Command User Interface
YES
Number of Sectors/Size
2K
Sector Size
128K
Page Size
2kB
Ready/Busy
YES
Height Seated (Max)
1.2mm
Length
18.4mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
S34ML02G100TFI003 Product Details
S34ML02G100TFI003 Overview
In this case, the memory type of the device can be classified as Non-Volatile. The case comes in Tape & Reel (TR) size. 48-TFSOP (0.724, 18.40mm Width) case encloses it. Memory size on the chip is 2Gb 256M x 8. The device uses a mainstream FLASH-format memory. A wide operating temperature range makes this device ideal for a variety of demanding applications. A voltage of 2.7V~3.6V is possible to be applied to the supply. The recommended mounting type for this device is Surface Mount. The chip contains 48 terminations. As many as 1 functions are supported for comprehensive working. In order to function properly, this ic memory chip should be powered by a voltage of 3.3V. This memory device is enclosed in a 48-pin package. A voltage of 3.3V is noted as the operating supply voltage for this memory. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. As far as the nominal supply current of this memory component is concerned, it is rated at 30mA. This part, which belongs to the ML-1 series of memory devices, plays an important role in its target applications. There is a need for a programming voltage of 3V in order to modify the state of some nonvolatile memory arrays. A total of 2K specifically sized divisions are contained in this memory.