AP1702AWG-7 Overview

It is mounted through 3 terminals on the power management. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Power management is included in the Surface Mount mount. It has a total of 3 pins that are attached to IC management. There are 59 pins on the power managment ic. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. We recommend setting the supervisors to 0°C~70°C TA degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 30μA. It is always advisable to use AP1702, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 30μA. The power management monitors 1 inputs at once.

AP1702AWG-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
30μA operating supply current

AP1702AWG-7 Applications

There are a lot of Diodes Incorporated AP1702AWG-7 Voltage Supervisors applications.

• DVR
• Detection of phase sequence
• Dash board
• Household appliances
• Set top box
• Radio
• Data storage applications
• Functional modules
• Radar
• Smartphones