AP2142AMPG-13 Overview

The LED driver's packaged as a Cut Tape (CT).This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.It has been mounted as Surface Mount on the LED driver.There is a USB Switch switch type associated with it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.There is a maximum output voltage of P-Channel volts.Load Discharge, Status Flag features are available on the lighting driver.There are 8 terminations in it.During operation, the 8 pins are used.It consists of 1 functions.The maximum output current is reduced to 500mA to meet the operation criteria.The supply voltage can be 5V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 8 pins.There is 125mOhm resistance on the LED driver.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 2 channels are available.This LED driver can handle voltages up to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.

AP2142AMPG-13 Features

Supplied from 5V
Resistance of 125mOhm
2 channels

AP2142AMPG-13 Applications

There are a lot of Diodes Incorporated AP2142AMPG-13 Power Switches ICs applications.

• Hot Swap
• Hot Swaps
• HDD and SSD
• Hot-Swap Systems
• USB Power Distribution
• Hard Disk Drives
• USB Power Distribution
• Wearable Devices
• Set-Top Boxes
• Telecom and Network Systems