AP393SG-13 Overview

To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type Open Collector output on this device.The chip is packaged with Tape & Reel (TR) .Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .This comparator has 8 pins.A quiescent current of 2.5mA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 1mA supply current.Input current to the device cannot exceed 250nA .The voltage formula shows that the part has a voltage gain of 106.02dB .There is no need to exceed 70°C in terms of temperature.Lower temperatures than 0°C are unsuitable for it.There is a maximum voltage supply on the comparator of 36V .This comparator can be supplied with a voltage as low as 2V .

AP393SG-13 Features

Open Collector output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

AP393SG-13 Applications

There are a lot of Diodes Incorporated
AP393SG-13 linear comparators applications.

• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications
• Limit Comparators