APX810-23SAG-7 Overview

There are 3 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. 3 pins are present on the power management system. Supply voltage (Vsup) should be at least 1.1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 30μA supply current present in the power management. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.

APX810-23SAG-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current

APX810-23SAG-7 Applications

There are a lot of Diodes Incorporated APX810-23SAG-7 Voltage Supervisors applications.

• Important electronics for automotive protection
• Power distribution systems of ICU
• DC stabilized power supply module
• DSP
• Microprocessor system
• Network equipment
• Smart meter
• Detection of phase loss
• Telecommunications equipment
• Satellite navigation