APX810-29SRG-7 Overview

Power management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. Pin count of the power management is 3. Supply voltage (Vsup) should be at least 1.1V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The power management's supply current is 30μA. It is always advisable to use APX810, the base supervisor number, when searching for similar PMICs from the manufacturer. In total, there are 1 inputs on the power management that can be monitored.

APX810-29SRG-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current

APX810-29SRG-7 Applications

There are a lot of Diodes Incorporated APX810-29SRG-7 Voltage Supervisors applications.

• Telecommunications equipment
• emergency room
• Analog circuit
• Rechargeable batteries
• Efficient information transmission
• Multi-voltage system
• Kitchen appliances
• Important electronics for automotive protection
• Leakage current detection
• Automotive power systems