APX811-23UG-7 Overview

Power management is mounted through 4 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to power management for TO-253-4, TO-253AA functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. There are a total of 4 pins on power management. There are 4 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating.

APX811-23UG-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V

APX811-23UG-7 Applications

There are a lot of Diodes Incorporated APX811-23UG-7 Voltage Supervisors applications.

• Power distribution systems of CCU
• Military electronics
• Low voltage/high power - AI, GPU
• Analog circuit
• Dash board
• Embedded computing
• DVR
• Radio
• Power distribution systems of operating room
• Microcontroller system