APX812-23UG-7 Overview

It is mounted through 4 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. 4 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole.

APX812-23UG-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V

APX812-23UG-7 Applications

There are a lot of Diodes Incorporated APX812-23UG-7 Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of ICU
• Military electronics
• Unattended substation automation
• Telecommunications equipment
• Battery cars
• Battery-powered equipment
• Power communication system
• Leakage current detection
• Fire equipment power monitoring system