AZ4580GTR-G1 Overview

The linear amplifier is packaged in a 8-TSSOP (0.173, 4.40mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 500μV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. You can run this op amp ic on 4mA . The voltage gain should stay at 110dB. There are 2 circuits on op amps. There are 2 channels on the operational amplifiers. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. You should not use op amp above 85°C degrees. It is recommended that you use an 4mA power supply with this electrical part in order for it to operate correctly. I would like to point out that this electrical component is capable of working from a voltage below 36V as far as the power supply is concerned. A high supply voltage of more than 4V is recommended for the instrumentation amplifier's supply voltage. There should be a dual supply voltage of 18V for you to conduct this electrical part.

AZ4580GTR-G1 Features

110dB voltage gain

AZ4580GTR-G1 Applications

There are a lot of Diodes Incorporated AZ4580GTR-G1 Instrumentational OP Amps applications.

• Communication
• Signal amplification
• Radar
• Logarithmic operation circuits
• Portable electronic products powered by batteries
• Signal transformation
• Inverse/same-phase proportional circuit
• Video data acquisition
• Medical imaging
• Comparator