AZV358MTR-G1

join

new-10%

Manufacturer part number:AZV358MTR-G1

Manufacturer:Diodes Incorporated

Description:30mA per Channel 11nA Instrumentational OP Amps 2.7V~5.5V 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:AZV358MTR-G1 Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	21 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Supplier Device Package	8-SOIC
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2013
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Output Type	Rail-to-Rail
Number of Circuits	2
Operating Supply Current	140μA
Current - Supply	140μA
Slew Rate	1V/μs
Amplifier Type	General Purpose
Current - Input Bias	11nA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	1.7mV
Gain Bandwidth Product	1MHz
Voltage - Input Offset	1.7mV
Current - Output / Channel	30mA
RoHS Status	ROHS3 Compliant

Quantity	Unit Price	Ext. Price
1	$5.326262	$5.326262
10	$5.024776	$50.24776
100	$4.740354	$474.0354
500	$4.472033	$2236.0165
1000	$4.218898	$4218.898

AZV358MTR-G1 Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. In terms of input offset voltage, operational amplifier rates 1.7mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureA supply current of 140μA can be used to operate this linear amplifier. There are 2 circuits on this op amp. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. It should not lower than -40°C to operate buffer amplifier. No temperature greater than 85°C should be used. We recommend that you use this electronic part with an 140μA supply in order to get the best performance from it.