DRDC3105E6-7

join

new-10%

Manufacturer part number:DRDC3105E6-7

Manufacturer:Diodes Incorporated

Description:3/5V Bipolar 0.95mm PMIC DRDC3105 6 Pin SOT-23-6

Case Package:SOT-23

Datasheet:DRDC3105E6-7 Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	15 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Operating Temperature	-55°C~150°C TJ
Packaging	Tape & Reel (TR)
Published	2000
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Peripheral Drivers
Max Power Dissipation	1.7W
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.95mm
Current Rating	430mA
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	DRDC3105
Number of Outputs	2
Output Type	Bipolar
Max Output Current	250mA
Power Supplies	3/5V
Interface	On/Off
Operating Supply Current	700μA
Element Configuration	Single
Output Current	430mA
Voltage - Supply (Vcc/Vdd)	Not Required
Switch Type	Relay, Solenoid Driver
Rise Time	411ns
Fall Time (Typ)	12.5 ns
Ratio - Input:Output	1:1
Voltage - Load	3V~5V
Number of Drivers	1
Height	1.1mm
Length	3mm
Width	1.6mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

Quantity	Unit Price	Ext. Price
3,000	$0.14338	$0.43014
6,000	$0.13563	$0.81378
15,000	$0.12788	$1.9182
30,000	$0.11858	$3.5574
75,000	$0.11470	$8.6025

DRDC3105E6-7 Overview

It is packaged in the form of a Tape & Reel (TR).In the SOT-23-6 package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns Relay, Solenoid Driver switch type.To ensure reliable operation, set the temperature to -55°C~150°C TJ.As a default, the output is set to 2.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of Bipolar volts on this LED driver.The DRDC3105 family consists of this type.A total of 6 terminations have been recorded.The operation is performed through the 6 pins.This operation requires the maximum output current to be decreased to 250mA.This lighting driver is mounted in the way of Surface Mount.When this is the case, the output current is set to 430mA.It is self-contained in an econtainer with a capacity of Peripheral Drivers.A 3/5V power supply is used by the part.It has 1 drivers.