MMBD4448DW-7-F Overview

In this case, the forward voltage has to be set at 1.25V to operate the device.There is a maximum output voltage of 0.25A.Array should be a rule to monArrayor the surge current and not allow Array to exceed 4A.In this case, the forward voltage has to be set at 150mA to operate the device.This part can draw 50mA current.In this device, there are approximately 4pF farads of capacitance.Powered by reverse voltage, this device has a peak voltage of 2.5μA.As a derivative of its primary action, this electronic or electrical device generates 200mW of heat.200mW heat is produced by this electronic or electrical device in the largest amount (energy loss or waste).

MMBD4448DW-7-F Features

1.25V forward voltage
a maximum output voltage of 0.25A
4pF farads
a peak voltage of 2.5μA
a reverse voltage peak of 2.5μA

MMBD4448DW-7-F Applications

There are a lot of Diodes Incorporated MMBD4448DW-7-F applications of rectifier diode array.

• Rectifiers in switch mode power supplies (SMPS)
• Battery chargers
• Crowbar applications
• Free wheeling diode in low voltage converters
• General Rectification
• Rectifier for drives applications
• Rectifiers for UBS