PAM2803AAF095 Overview

Save board space with SOT-23-6 package. LED drivers design with 1 outputs.In order to mount the led light driver, Surface Mount is used.The system emerges as a DC DC Regulator with high efficiency.When the temperature is -40°C~85°C TA, it can work normally.There are many benefits for Camera Flash.In this case, the termination value is 6.The base of this board is configured as 6 pins.It is possible that failures will occur if the voltage supply is below 0.9V.1 segments exist.There is a mounting of it by Surface Mount.It can be found under the part number PAM2803.Ideally, the supply voltage should be 5.5V.According to its characteristics, it is also classified into Display Drivers.The input voltage must be minimally 900mV.5.5V is the maximum value of the supply current.1A is the maximum current the load can handle.The electronic component can function fully when the switching frequency is maintained at 1MHz.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 1A.It is not recommended to exceed 5V in the output voltage.

PAM2803AAF095 Features

Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Supply voltage of 2.4V
Switching frequency of 1MHz

PAM2803AAF095 Applications

There are a lot of Diodes Incorporated PAM2803AAF095 LED Driver ICs applications.

• A- lamps
• OLED power supply for portable equipment
• Medical surgery lighting
• Constant Voltage Power Source for portable equipment
• Down lights
• Other Electronic Devices
• Dimmable LED for vehicle interiors
• Auxiliary lights for on-vehicle cameras
• Scanners and Handy Terminals
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices