PI3CH401LE Overview
Providing this information in the 14-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Tube.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 2.25V~3.6V, designers are provided with a greater degree of flexibility.Among its basic features are 16 terminations.The base part number is 3CH401, which can also be used to find its logic switch related parts.The multiplexer is supplied with 2.5V voltage.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.This multiplexer ic has 16 pins configured.The mount is in Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.As a result, signal multiplexer provides 1 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.25V.It is advisable to keep the maximum supply voltage (Vsup) at 2.75V in order to prevent some unnecessary failures.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.With a resistance of 0, it operates.In terms of resistance, it has a value of 7Ohm.Additionally, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics.
PI3CH401LE Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY
PI3CH401LE Applications
There are a lot of Diodes Incorporated PI3CH401LE Signal Switches / Multiplexers / Decoders applications.
- Encrypted communications system
- Microprocessor memory systems
- Data transfer
- Speed control of medern motors
- Data-routing applications
- Steel plants
- Idle motor
- Transmission from the computer system of a satellite
- To select different devices in microprocessor output
- Data distribution
