PI49FCT3807QEX Overview

A 20-SSOP (0.154, 3.90mm Width) case is used for packaging. There is a case available for the circuit clock in Tape & Reel (TR). It is recommended that the maximum value for normal operation is 50MHz. It has 20 terminations. The supply voltage of 3.3V can be used to achieve high efficiency. In this case, it will be mounted by Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). It is recommended to set the temperature to -40°C~85°C so the system can perform reliably. This circuit clock should be able to operate on a power supply of 3V~3.6V volts. There is a place for it in the way of Surface Mount. The output is CMOS, TTL. Operation is performed using the 20 pins. Basically, it belongs to the same family as the 49FCT3807. The clock divider is located in Clock Drivers. A member of the FCT family, this gadget is a timeing clock. It's set to 3.6V for the maximum supply voltage (Vsup). To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 3V. By default, the output is set to 10. It is a part of the 49FCT series of electrical parts. Keeping the supply voltage at 3.3V will ensure maximum efficiency. The clock divider consumes 3μA quiescent current and does not react to external factors.

PI49FCT3807QEX Features

20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

PI49FCT3807QEX Applications

There are a lot of Diodes Incorporated PI49FCT3807QEX Clock Buffers & Drivers applications.

• 5G
• Threshold detection
• Clock signal level shifting
• Backplane
• Furniture
• Navigation equipment
• Mobile Internet Device (MID)
• Mass storage system
• DDR4 JEDEC standard LRDIMM design
• Switch