SP491EN-L Overview

Designed for common LEDs, this driver IC features an enhanced SOIC package.An output voltage range of 5V is sufficient to run this line driver ic efficiently.The transceiver is packaged with 14 market standard pinouts so that it can be easily used.14-pin driver chip with enhanced power dissipation.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.There are two types of input voltage supply available for this IC, 5V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.A transceiver module's temperature of less than 85°C is required for operation.It must not be less than -40°C degrees Celsius for this optical transceiver to operate properly.With an input voltage of 900μA, this integrating circuit has the ability to drive LEDs with an output voltage of 900μA.As far as supply voltages are concerned, the maximum voltage that this IC is rated at is 5.25V.1 transmitters are present, which are can transceivers that produce radio waves to transmit or send data with the help of antennas.In order to run this line driver ic, the supply voltage must be at least 4.75V.

SP491EN-L Features

14 pin count
14 pins
5V power supply

SP491EN-L Applications

There are a lot of Exar Corporation
SP491EN-L Drivers/Receivers/Transceivers applications.

• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio
• Clock radio
• Tuner
• Portable radio
• Car radio