CSDA1DA Overview

In order to provide safety protection, the current sensors are packaged in Module, Single Pass Through packages. The current sensors are enclosed in the Bulk to prevent them from being damaged. Current sensors should only output 12mA current. A current sensor should not provide a current greater than 12mA. In order for these current sensors to function, the operating temperature cannot be lower than -25°C. However, the maximum operating temperature for the current sensors should be 85°C. In the current sensor design, 12mA is the current for which the sensors are designed. The nominal current supplied by current sensors should be 12mA. Current sensors should produce a voltage of 400mV. Current sensors should output 20mA current. A DC circuit cannot have a voltage below 6V supplied by these sensors. In the DC circuit, the voltage supplied by the current sensors should however not exceed 16V.

CSDA1DA Features

Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Connector
Sensor Type: Current Switch
Supply Voltage: 6V~16V
Sensing Current: 1A
Module, Single Pass Through Package

CSDA1DA Applications

There are a lot of Honeywell Sensing and Productivity Solutions CSDA1DA Current Sensors applications.

• Static converters for DC motor drives
• Battery supplied applications
• Switched Mode Power Supplies (SMPS)
• Closed-L oop DC- and AC-Current Sensor Modules
• Power Supplies for welding applications
• AC variabel speed drives and servo motor drives
• Mobile applications
• Power supply management
• Leakage Current Sensors
• Power factor correction