CSLA2DG Overview

For safety reasons, the current sensors are packaged in Module, Single Pass Through packages. In order to protect the devices from damage, these current sensors are packaged in the Bulk. These current sensors should supply no more than 20mA current. Current sensors should not supply more current than 20mA. In order for these current sensors to work, the temperature must not be lower than -25°C. Nevertheless, the maximum operating temperature for the current sensors should be set to 85°C. Current sensors have been designed for 150A current. This current sensor has 3 pins. As a rule of thumb, current sensors should supply 20mA current. It is important that the voltage supplied by these sensors is not lower than 6V in a DC circuit. In the DC circuit, however, the voltage supplied by the current sensors should not exceed 12V.

CSLA2DG Features

Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 150A
Module, Single Pass Through Package

CSLA2DG Applications

There are a lot of Honeywell Sensing and Productivity Solutions
CSLA2DG Current Sensors applications.

• Inverter and H-bridge current measurements
• Power factor correction
• Overcurrent protection
• DC and AC power monitoring
• Closed-L oop DC- and AC-Current Sensor Modules
• Leakage Current Sensors
• Industrial Monitoring and Control Systems
• Overcurrent Detection
• Frequency, Voltage, and Solar Inverters
• Electrical drives