CSNP661 Overview

The current sensors are put into Module, Single Pass Through packages for safety protection. These current sensors are packaged in the Bulk to protect the devices from damage. The maximum current supplied by these current sensors should be 10mA. The current supplied by current sensors should not be higher than 10mA. The operating temperature must not be lower than -40°C to ensure these current sensors work. But the maximum operating temperature for the current sensors should be set to 85°C. The current for which the current sensors have been designed is 90A. There are 3 pins in this current sensor. Nominally, the current supplied by current sensors should be 10mA. The current output from current sensors should be 50mA. In a DC circuit, the voltage supplied by these sensors should not be lower than 12V. But the voltage supplied by the current sensors should not exceed 15V in the DC circuit.

CSNP661 Features

Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±12V~15V
Frequency: 150kHz
Sensing Current: 90A
Module, Single Pass Through Package

CSNP661 Applications

There are a lot of Honeywell Sensing and Productivity Solutions
CSNP661 Current Sensors applications.

• Motor and load control
• Inverter and H-bridge current measurements
• Power factor correction
• Overcurrent protection
• DC and AC power monitoring
• Closed-L oop DC- and AC-Current Sensor Modules
• Leakage Current Sensors
• Industrial Monitoring and Control Systems
• Overcurrent Detection
• Frequency, Voltage, and Solar Inverters