BCR420UE6327HTSA1 Overview

SC-74, SOT-457 saves board space. LED drivers design with 1 outputs.Surface Mount is used for mounting the led light driver.In this case, it emerges as a Linear with a high efficiency.It is clear that Lighting will benefit from the program.In this case, it operates with terminations of 0.The base of this board is configured as 6 pins.Based on our estimates, there are 2 segments.It has been mounted on Surface Mount.There is a base part number BCR420 for this LED driver.It is acceptable to have a maximum voltage of 40V.This device requires a minimum voltage of 1.4V volts.For maximum efficiency, it operates at the minimal voltage of 1.4V.There is 40V maximum value for supply current.In order to ensure stable operation, the operating temperature should not exceed 150°C.There is no current available to supply to the load.Stable operation requires a temperature greater than 0°C.The electronic component can fully perform its functions if the switching frequency is maintained at 10kHz.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 150mA.Several applications make use of this LED driver from the Automotive, AEC-Q101 series.Ideally, the output voltage should not exceed 38V.

BCR420UE6327HTSA1 Features

• Available in the SC-74, SOT-457 package

• Switching frequency of 10kHz

BCR420UE6327HTSA1 Applications

There are a lot of Infineon Technologies BCR420UE6327HTSA1 LED Driver ICs applications.

• Stage and Studio lighting

• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights

• Auxiliary lights for on-vehicle cameras

• Museum lighting

• Street lighting

• Flicker-free LED Lighting using R1580N

• Other Electronic Devices

• OLED power supply for portable equipment

• Portable lighting

• Power source for accessories such as car audios, car navigation systems, and ETC systems