BTS410E2E3043 Overview

In the TO-220-5 package you will find it.The 5 terminations total to three.Device SINGLE is located at the terminal position.The device consists of a total of 3 pins.The supply voltage 12V is necessary for high efficiency.During operation, 5 pins are used.Despite its self-contained nature, Peripheral Drivers is a very compact device.As you can see, it is positioned in the direction of Through Hole.For stable operation, the maximum operating temperature should be 150°C°C.At a minimum working temperature of -40°C degrees Celsius, it maintains its reliability.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 4.7V so that the device can function normally.Vsup is set to 42V, the maximum supply voltage.Hot Swap is set by default to output 1.Consequently, 12A is the maximum output current that can be achieved to meet the operation criteria.There is a maximum current requirement of 1mA for it to operate.There is a 190mOhm resistance on this device.

BTS410E2E3043 Features

The terminal position of 3

BTS410E2E3043 Applications

There are a lot of Infineon Technologies
BTS410E2E3043 hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems