IPS5451S Overview

It is packaged in the form of a Tube.This package is included in TO-263-5, D2Pak (4 Leads + Tab), TO-263BB.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.The IPS5451S family consists of this type.The termination count is 4.In order to operate, 220 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 3.5A to meet the operation criteria.High efficiency is possible at 14V supply voltage.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has a resistance of 19mOhm ohms.In this case, the output current will be set to 1A.Normal operation requires Vsup above 5.5V.

IPS5451S Features

Supplied from 14V
Resistance of 19mOhm

IPS5451S Applications

There are a lot of Infineon Technologies IPS5451S Power Switches ICs applications.

• Notebook and Tablet Computers
• Low Voltage I/O System Power
• PC Card Hot Swap
• Hard Disk Drives
• Storage (HDDs, SSDs)
• Wearable Devices
• Solid State Drivers
• Portable/Handheld Devices
• Telecom and Network Systems
• Handheld Devices