6116SA55TDB Overview

There is a memory type SDR for this type of device. The file is embedded in a CDIP case. This chip has an 2kB size of memory on it, so a lot of data can be stored on it. The chip contains 24 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 24 pins is used to protect this memory device. The memory device has 24 pins, which means that it has 24 memory locations, which indicates it is an 24-bit device. This memory runs on an 5V operating supply voltage. Each memory address is accessed by one of 1 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an -55°C operating temperature for this device. The part should not be operated at temperatures above 125°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage.

6116SA55TDB Features

Package / Case: CDIP
24 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

6116SA55TDB Applications

There are a lot of Integrated Device Technology (IDT)
6116SA55TDB Memory applications.

• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic