6116SA70DB Overview

As far as its memory type goes, it falls into the RAM, SDR, SRAM - Asynchronous category. You can get memory ics in a Bulk case. CDIP case encloses it. There is 2kB of memory on the chip. There are 24 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. In this ic memory chip, there is an 24-pin package that encloses the device. It is worth noting that this memory device has 24 pins, which indicates it has 24 memory locations. This memory chip has an operating supply voltage of 5V. As a result of the Through Hole mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 90mA. Using 1 ports, a single memory address can be read and/or written. As for the power supply, this memory chip only needs 5V . A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least -55°C. Temperatures over 125°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 4.5V volts. The operating voltage of the memory ics shall not exceed 5.5V.

6116SA70DB Features

Package / Case: CDIP
24 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

6116SA70DB Applications

There are a lot of Integrated Device Technology (IDT)
6116SA70DB Memory applications.

• multimedia computers
• networking
• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory